The cold rolling process of the thread rolling machine is currently a more advanced non-cutting process, which can better improve the internal and external quality of the workpiece, and the radial compressive stress generated by the processing time can significantly improve the fatigue of the workpiece. Strength and strength of change, in general, is an efficient, energy-saving, low-cost, non-cutting process.

The main function of the thread rolling machine is to stop the thread, straight line and twill rolling of the workpiece under the cold state, and then stop rolling on the straight tooth, the helical tooth and the oblique spline gear, and then one can Stop rolling on straightening, reduction, rolling, and various forming parts. Its operation mainly relies on safe and reliable power. Its main system has liquid execution system and control system. There are three working cycle forms, manual, semi-automatic and automatic.

There are two main types of thread rolling machine market, one is the two-axis thread rolling machine, which is more common because of the cheap price. The other is a three-axis, three-axis machine that mainly processes thin-walled tubular engineering parts, such as the hollow screw of an engineering building.

The cold rolling process of the thread rolling machine is currently a more advanced non-cutting process, which can better improve the internal and external quality of the workpiece, and the radial compressive stress generated by the processing time can significantly improve the fatigue of the workpiece. Strength and strength of change, in general, is an efficient, energy-saving, low-cost, non-cutting process.

Stability automatic hydraulic triaxial thread rolling machine 

Need to pay attention to when the thread rolling machine equipment is installed

In order to make the thread rolling machine have better effect when used, there are many aspects to be aware of when installing. So what do you need to pay attention to?

1. When installing the thread rolling machine, make sure its grounding is reliable. The thread rolling machine manufacturer recommends that an appropriate fuse device be installed in the lead-in power supply. In order to make the operator more secure during use, it is preferable to install the leakage protection device. In addition, it is recommended to introduce a power cord to be buried in the installation.

2. Turn on the electrical box equipment and carefully check if all the terminals inside are loose. If you find the problem, tighten them immediately. The thread rolling machine manufacturer reminds you that you need to check the status of the wires to ensure that the wires are complete and there will be no problem of broken skin. When problems are found, they should be replaced in time.

3. During the test run after the power is turned on, it is necessary to pay attention to the operation of the hydraulic motor, and ensure that it is in a clockwise rotation state. In addition, the cooling water pump is also a very important component. If the coolant is reversed, the coolant will not come out, or it will come out very little. The main motor can be disregarded. It is determined according to the workpiece and the selection switch of the rolling mold used on the panel to rotate to the left or to the right. If the phase sequence is wrong, just leave the power cord free. It is ok to change the position of the two phase lines.

Our company provides a variety of thread rolling machines and bar bending machine and large rolling machine. If you want to know more product information, please log in to our product interface to understand, we are looking forward to your contact.